OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: BPS 10 BORE. Choke for 2 oz. #5?  (Read 11610 times)

Offline 10gaugemag

  • The Boss Gobbler
  • ****
  • Posts: 517
BPS 10 BORE. Choke for 2 oz. #5?
« on: May 21, 2018, 10:07:20 AM »
Looking for a choke to shoot 2 oz. #5 lead.

 My current XX Comp n Choke and .695 Hastings shoot the worst patterns I have seen this gun shoot. Must need choked pretty good.

 I haven't tried Flightcontrol loads in the Hastngs yet, they may do good just need to buy some and shoot.

 Sure wish manufacturers hadn't stopped making good heavy loads for the 10. Those old 2 1/4 oz. XX #5 were the cats meow in my 10.

 What say you?

Offline 457121

  • Full Member
  • *
  • Posts: 68
Re: BPS 10 BORE. Choke for 2 oz. #5?
« Reply #1 on: May 21, 2018, 05:42:45 PM »
I have the Hastings .700 and the SRM Terror .705 for my BPS. I've never used the new 2oz. loads from Federal or Winchester. I have a 250 round flat of the old Winchester XX Supreme 2 1/4oz. #5 that I use and each choke patterns great with that shell. There is a guy on GunAuction.com that has some of the old 2 1/4oz. #5 Win XX Supreme's for sale. He has several buy now auctions for 1,2,4, or 5 boxes.

Offline 10gaugemag

  • The Boss Gobbler
  • ****
  • Posts: 517
Re: BPS 10 BORE. Choke for 2 oz. #5?
« Reply #2 on: May 21, 2018, 06:02:42 PM »
Found it.
 Different hull than the older ones I was shooting but I bet they are still some bad SOBs.

Offline 457121

  • Full Member
  • *
  • Posts: 68
Re: BPS 10 BORE. Choke for 2 oz. #5?
« Reply #3 on: May 22, 2018, 08:46:10 AM »
Were you shooting the old paper base wad Winchester hulls? The ones he's selling are plastic base wad hulls. Winchester had a few variations on their all plastic hulls. I have several boxes of XX Supreme 2 1/4oz. #4 with an eight point crimp. Prior to buying them I had never seen an 8 point crimp on a 10ga. shell before and not since.

Offline 10gaugemag

  • The Boss Gobbler
  • ****
  • Posts: 517
Re: BPS 10 BORE. Choke for 2 oz. #5?
« Reply #4 on: May 22, 2018, 01:49:39 PM »
I believe so. 8 crimp for sure. Smooth hull w smaller writing.

I have an old #2 lead load at house w same style hull as those #5.

 These were bought in about 95 or 96 when I bought my first true "turkey" choke. Never had seen a gun shoot like mi e did with those loads and the .695 Hastings.

 Still use that tube some although my Comp n Choke does a bit better w 2 1/4 oz. #4s.  Be interesting to see what it would do with the old #5s.

Offline Yoder409

  • 2023 SITE SUPPORTER
  • Limbhanger
  • ********
  • Posts: 4248
  • Turkeys are ignorant.
Re: BPS 10 BORE. Choke for 2 oz. #5?
« Reply #5 on: May 22, 2018, 08:40:00 PM »
I could never get the 2 1/4 oz. loads (except for #2 shot) to pattern as well as the 2 oz. loads.

The old 2 oz. Winchester Supreme HV shells in #6 patterned like MONSTERS outta my BPS 10 through a Comp-N-Choke XXX-Full tube.  Then they quit making them in #6...................... figures.

The same shell in #5 still patterns VERY strong.  But not like the #6's.
PA elitist since 1979

The good Lord ain't made a gobbler I can't kill.  I just gotta be there at the right time.....  on the day he wants to die.

Offline WildTigerTrout

  • Longbeard
  • ****
  • Posts: 1332
  • "Big Woods" NC Pennsylvania Public Land Boss
Re: BPS 10 BORE. Choke for 2 oz. #5?
« Reply #6 on: May 22, 2018, 11:00:31 PM »
I could never get the 2 1/4 oz. loads (except for #2 shot) to pattern as well as the 2 oz. loads.

The old 2 oz. Winchester Supreme HV shells in #6 patterned like MONSTERS outta my BPS 10 through a Comp-N-Choke XXX-Full tube.  Then they quit making them in #6...................... figures.

The same shell in #5 still patterns VERY strong.  But not like the #6's.
I agree. I have hoarded 4 full boxes of the HV 6's.  I know they like my BPS with an original .695 Bansner made Tru-Glo Choke.  Shame they quit making them.  The loads and the choke.
Deer see you and think you are a stump. The Old Gobbler sees a stump and thinks it is YOU!

Offline Rockhound

  • The Boss Gobbler
  • ****
  • Posts: 842
Re: BPS 10 BORE. Choke for 2 oz. #5?
« Reply #7 on: May 23, 2018, 09:54:26 AM »
If you can find a hastings 675, it is the ticket for lead loads in that gun

Offline 4nolz2

  • Hero Member
  • ***
  • Posts: 351
Re: BPS 10 BORE. Choke for 2 oz. #5?
« Reply #8 on: May 23, 2018, 11:53:01 AM »
457121 could you post a link? I couldn't find those shells on gunauction.com. Thanks!

Offline 10gaugemag

  • The Boss Gobbler
  • ****
  • Posts: 517
Re: BPS 10 BORE. Choke for 2 oz. #5?
« Reply #9 on: May 23, 2018, 07:50:13 PM »
457121 could you post a link? I couldn't find those shells on gunauction.com. Thanks!
https://www.gunauction.com/shop/ammo-for-sale-hunting-shooting/shotgun-ammo-for-shooting/winchester/10-ga

Offline 4nolz2

  • Hero Member
  • ***
  • Posts: 351
Re: BPS 10 BORE. Choke for 2 oz. #5?
« Reply #10 on: May 24, 2018, 10:23:18 AM »
 Thanks 10GM!

Offline 10gaugemag

  • The Boss Gobbler
  • ****
  • Posts: 517
Re: BPS 10 BORE. Choke for 2 oz. #5?
« Reply #11 on: May 24, 2018, 05:53:48 PM »
Thanks 10GM!
No problem!


I guess I should've bid 3 days ago when I didn't have any competition!!

 I am surprised these haven't been bought yet. Have been past the bidding date/time 3 times I believe.

Offline 457121

  • Full Member
  • *
  • Posts: 68
Re: BPS 10 BORE. Choke for 2 oz. #5?
« Reply #12 on: May 25, 2018, 08:51:18 AM »
Thanks 10GM!
No problem!


I guess I should've bid 3 days ago when I didn't have any competition!!

 I am surprised these haven't been bought yet. Have been past the bidding date/time 3 times I believe.
Actually this ammo has been on Gun auction from this seller for years. I bought a 250 round flat from him for $235 shipped back in 2015. He had a half dozen flats for sale at one time plus the 1,2,3,5 box auctions. I've been reloading 10ga. ammo since I was in high school back in the '80's and you couldn't load them for the price of a flat ($.94 each) if you had to buy new hulls.

Offline Yoder409

  • 2023 SITE SUPPORTER
  • Limbhanger
  • ********
  • Posts: 4248
  • Turkeys are ignorant.
Re: BPS 10 BORE. Choke for 2 oz. #5?
« Reply #13 on: May 25, 2018, 09:21:25 PM »
I could never get the 2 1/4 oz. loads (except for #2 shot) to pattern as well as the 2 oz. loads.

The old 2 oz. Winchester Supreme HV shells in #6 patterned like MONSTERS outta my BPS 10 through a Comp-N-Choke XXX-Full tube.  Then they quit making them in #6...................... figures.

The same shell in #5 still patterns VERY strong.  But not like the #6's.
I agree. I have hoarded 4 full boxes of the HV 6's.  I know they like my BPS with an original .695 Bansner made Tru-Glo Choke.  Shame they quit making them.  The loads and the choke.

Yeah...………………..that's what I shoulda done, too.  But I didn't.  Who'da ever thunk they'd quit making such a fantastic and popular shell ???

I guess whoever at Winchester made THAT decision left and went to Federal so he could kill the Heavyweight loads, too...………..   :(
PA elitist since 1979

The good Lord ain't made a gobbler I can't kill.  I just gotta be there at the right time.....  on the day he wants to die.

Offline deadbuck

  • The Boss Gobbler
  • ****
  • Posts: 749
Re: BPS 10 BORE. Choke for 2 oz. #5?
« Reply #14 on: May 26, 2018, 11:04:37 AM »
When ya'll talk about a 2 oz load of #5 lead being a good pattern, what kind of numbers are you referring to? I have some Federal 2 oz #5 copper plated lead and they are terrible in a Sumtoy .685 out of a 32 inch H&R barrel.