OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: Longbeard 1 3/4 or 1 7/8?  (Read 6835 times)

Offline outdoorsmen

  • Hero Member
  • ***
  • Posts: 266
Longbeard 1 3/4 or 1 7/8?
« on: May 14, 2018, 02:57:58 PM »
The 1 7/8oz load of #5 is hard to find. Anyone have better results with one over the other?

Offline BrowningGuy88

  • Longbeard
  • ****
  • Posts: 1361
Re: Longbeard 1 3/4 or 1 7/8?
« Reply #1 on: May 14, 2018, 04:42:58 PM »
I always shoot the lower payload, higher velocity load if it will pattern for penetration.

Offline Bowguy

  • Limbhanger
  • ******
  • Posts: 4559
Re: Longbeard 1 3/4 or 1 7/8?
« Reply #2 on: May 15, 2018, 10:38:39 AM »
I’m the opposite. There’s no way a bird walks away from low velocity. Imo it another marketing hype.
That being said w a little tighter choke (.665) I actually had better results w the lower payload. W .675 choke the heavier loads shined.

Offline Ralph-NY

  • Full Member
  • *
  • Posts: 65
Re: Longbeard 1 3/4 or 1 7/8?
« Reply #3 on: May 16, 2018, 08:11:09 PM »
Both are great but I’ve had better and more consistent patterns with the 1 7/8 loads

Offline MickT

  • Sr. Member
  • **
  • Posts: 158
Re: Longbeard 1 3/4 or 1 7/8?
« Reply #4 on: May 16, 2018, 08:15:17 PM »
I choose low velocity higher payload as well.


Sent from my iPhone using Tapatalk

Offline mspaci

  • The Boss Gobbler
  • ****
  • Posts: 850
Re: Longbeard 1 3/4 or 1 7/8?
« Reply #5 on: May 18, 2018, 08:00:33 AM »
I got 160`s with a .665 trulock, 1 7/8 load, Mike

Offline dms2511

  • Hero Member
  • ***
  • Posts: 280
Re: Longbeard 1 3/4 or 1 7/8?
« Reply #6 on: May 27, 2018, 10:13:52 PM »
Both are great loads, but I’ve had better luck with lower velocity and heavier as well. Particurally in the #5’s for whatever reason.

Offline 10gaugemag

  • The Boss Gobbler
  • ****
  • Posts: 517
Re: Longbeard 1 3/4 or 1 7/8?
« Reply #7 on: May 27, 2018, 11:52:56 PM »
Never tried the heavier loads.

 The 1 3/4 oz. load in my 24" Browning Gold with Star Dot tube prints somewhere in the 160s so don't see any reason to try the 1 7/8  oz. load.

Offline Seminoleturkey

  • Sr. Member
  • **
  • Posts: 108
Re: Longbeard 1 3/4 or 1 7/8?
« Reply #8 on: March 03, 2020, 09:07:27 PM »
My Weatherby 459 and IF Choke definitely shoots a lot better with the 1 7/8 load

Offline strum

  • Hero Member
  • ***
  • Posts: 455
Re: Longbeard 1 3/4 or 1 7/8?
« Reply #9 on: March 03, 2020, 10:57:58 PM »
My Weatherby 459 and IF Choke definitely shoots a lot better with the 1 7/8 load

 What is the constriction on that choke?  just curious did you mean IC as in Indian Creek

Offline tnanh

  • The Boss Gobbler
  • ****
  • Posts: 668
Re: Longbeard 1 3/4 or 1 7/8?
« Reply #10 on: March 04, 2020, 04:08:34 PM »
I shoot the 1 7/8 6s in a 3 inch shell. It is an old single shot, 3 inch chamber threaded in Rem. choke.  With a Sum toy .665 it shoots a little over 200 in a 10 inch circle. The 5s also shoot a nice pattern but I really don't remember the exact numbers. I think the 5s were a little over 150. I went with the 6s because they are the best lead pattern I ever shot. Every turkey I shot with them was 30 to 40 yards and was drt.

Offline Old Timer

  • The Boss Gobbler
  • ****
  • Posts: 940
Re: Longbeard 1 3/4 or 1 7/8?
« Reply #11 on: March 11, 2020, 03:23:05 PM »
Got the best results with 1 3/4 ounce

Offline coonhunter

  • Sr. Member
  • **
  • Posts: 168
Re: Longbeard 1 3/4 or 1 7/8?
« Reply #12 on: March 23, 2020, 02:39:41 PM »
I had better patterns with the 1 3/4 oz #6 vs 1 7/8 oz.  With the 1 3/4's i got 225 in the 10 at 40.  With 1 7/8 i was around 180.  All shot through a Remington 870 Supermag  with a 26" barrel and IC .665 choke.  I also shot the 3 1/2" #6 and only for 20 more pellets.  Figured the 3 1/2's was not worth the recoil!! 

 
Joshua 24:15

CrustyRusty

  • Guest
Re: Longbeard 1 3/4 or 1 7/8?
« Reply #13 on: April 12, 2020, 09:30:07 PM »
I get around 220 with a titewad in my 870 with 1 3/4 6’s. Good enough for me.

Offline Seminoleturkey

  • Sr. Member
  • **
  • Posts: 108
Re: Longbeard 1 3/4 or 1 7/8?
« Reply #14 on: March 02, 2021, 08:13:33 PM »
Yes IC choke .665
My Weatherby 459 and IF Choke definitely shoots a lot better with the 1 7/8 load

 What is the constriction on that choke?  just curious did you mean IC as in Indian Creek