OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: Looking for a tube for 12ga M2  (Read 1605 times)

Offline Life of Riley

  • Sr. Member
  • **
  • Posts: 114
Looking for a tube for 12ga M2
« on: March 21, 2018, 01:46:40 PM »
I'm looking for suggestions for a choke for my 12ga M2 28" barrel. Non ported preferred. Flush or extended doesn't matter. I will put the range time in after purchasing. I shoot longbeard 3" 6's

Thanks :smiley-patriotic-flagwaver-an

Offline taylorjones20

  • Longbeard
  • ****
  • Posts: 1333
Re: Looking for a tube for 12ga M2
« Reply #1 on: March 21, 2018, 02:30:40 PM »
Non ported - Rob Roberts .660
Alive only by the Grace Of God

Offline Boilermaker

  • Full Member
  • *
  • Posts: 74
Re: Looking for a tube for 12ga M2
« Reply #2 on: March 21, 2018, 08:31:23 PM »
Give Jeb’s a look.  I run their ported .650 head hunter in my SBEII with 26” barrel, and it’s deadly @ 40 yds with 3.5” long beard #5s.  Benelli’s typically like a tight constriction.  I shot a .665  Indian Creek before but just wasn’t happy with the pattern.  Guys in the Benelli forum seem to do well with the IC chokes.  You just have to pattern and see what it likes.  It just unfortunately costs money!!

Online WV Ridge Reaper

  • Longbeard
  • ****
  • Posts: 1540
Re: Looking for a tube for 12ga M2
« Reply #3 on: March 21, 2018, 08:54:47 PM »
210s out of my 21 inch barrel LB’s 6s with a IC 665


Sent from my iPhone using Tapatalk

Offline reynolds243

  • Longbeard
  • ****
  • Posts: 1757
  • Lebanon TN
    • Simmons Calls
Re: Looking for a tube for 12ga M2
« Reply #4 on: March 22, 2018, 03:42:05 PM »
Non ported - Rob Roberts .660

same here, Rob knows benelli's but I shoot a 655 out of mine with magblends and it is pretty sweet. 

Offline taylorjones20

  • Longbeard
  • ****
  • Posts: 1333
Re: Looking for a tube for 12ga M2
« Reply #5 on: March 22, 2018, 04:10:01 PM »
Non ported - Rob Roberts .660

same here, Rob knows benelli's but I shoot a 655 out of mine with magblends and it is pretty sweet.

Yeah, I just remember that Rob recommends .660 in the 28" barrel.  I'm sure either would give a good pattern though.
Alive only by the Grace Of God

Offline reynolds243

  • Longbeard
  • ****
  • Posts: 1757
  • Lebanon TN
    • Simmons Calls
Re: Looking for a tube for 12ga M2
« Reply #6 on: March 22, 2018, 04:19:14 PM »
Non ported - Rob Roberts .660

same here, Rob knows benelli's but I shoot a 655 out of mine with magblends and it is pretty sweet.

Yeah, I just remember that Rob recommends .660 in the 28" barrel.  I'm sure either would give a good pattern though.


you are correct,  I shoot a 26" barrel so it may be tad different. When I originally called him he recommended both but wanted me to start with the 655, granted he just got done lengthening the forcing cone and porting it not sure if that makes much of a different. 

Offline SOCOM304

  • Sr. Member
  • **
  • Posts: 115
Re: Looking for a tube for 12ga M2
« Reply #7 on: March 26, 2018, 06:14:35 PM »
Even though Benelli’s are slightly under bored, and like a tighter constriction than normal, you might go up to a .665 with your 28” I have had great results from a .660 Sumtoy and a .665 IC in 24 & 26” bbl’s respectively. Shells were WIN LB 6’s & H-13 7’s.

Offline Life of Riley

  • Sr. Member
  • **
  • Posts: 114
Re: Looking for a tube for 12ga M2
« Reply #8 on: March 27, 2018, 09:30:46 AM »
 I ordered a carlsons .665 non por ted extended turkey choke. I'll get to the range in the next week. Will test LB 4,5,6, and mag blend. All in 3 inch shells.

Offline BINK McCARTY

  • The Boss Gobbler
  • ****
  • Posts: 831
  • Beak first in th' dirt...
Re: Looking for a tube for 12ga M2
« Reply #9 on: April 13, 2018, 03:55:30 AM »
Just a thought.....I have a Rob Roberts .640 i'd take $60 shipped on. I know you probably don't want to go that tight ,but I saw your post and thought i'd offer!!!