OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: Tuning screw rubbing/squeaking  (Read 3230 times)

Offline Coop1082

  • The Boss Gobbler
  • ****
  • Posts: 931
Tuning screw rubbing/squeaking
« on: September 02, 2017, 06:43:39 PM »
Have a Halloran Macassar/Poplar box a local fella practically gave me today. He hasn't had it too long and sold it off to me for a heck of a price due to a weird squeak/eek/rubbing (hard to describe) the screw gives off when running the box fairly aggressively. Figured it was worth the buy being as I knew I could come here and ask for any possible ways to fix the issue or just eventually send it off to David to have it looked at. That said do any of you box gurus/makers have a way I could fix the sound?
CRUSADERS
2016-2017-2018-2019 four time Old Gobbler Contest Champions


[/img]

Offline Coop1082

  • The Boss Gobbler
  • ****
  • Posts: 931
Re: Tuning screw rubbing/squeaking
« Reply #1 on: September 02, 2017, 07:14:09 PM »
Makes sense! It's more of a "in the hands" issue for what it's worth. Turned my phone video on, stepped off around 20 yards, ran the mess out of it, and you can't hear it over the video. Walked it in and when I got to practically right on top of the phone the sound was able to be picked out. If I pick the paddle up and spin it in circles there isn't a sound to be heard from the screw unless you stick your ear right up to it, but when you lay it on the rails and start running the sound shows up. Thanks for the reply Chris!
CRUSADERS
2016-2017-2018-2019 four time Old Gobbler Contest Champions


[/img]

Offline Spring Creek Calls

  • 2024 SITE SUPPORTER
  • Long Spur Gobbler
  • ********
  • Posts: 5411
  • Spring Creek Turkey Calls
Re: Tuning screw rubbing/squeaking
« Reply #2 on: September 02, 2017, 07:58:20 PM »
I've quieted spring/screw noise with a little bow string wax. I put a little on a q-tip, push the paddle down and wipe around the bottom side of the screw head. Removing the paddle and applying works also.
2014  SE Call Makers Short Box 2nd Place
2017  Buckeye Challenge Long Box 5th Place
2018  Mountain State Short Box 2nd Place
2019  Mountain State Short Box 1st Place
2019  NWTF Great Lakes Scratch Box 4th Place
2020 NWTF GNCC Amateur 5th Place Box
2021 Mountain State 3rd Place Short Box
2021 SE Callmakers 1st & 2nd Short Box
E-mail: gobblez@aol.com
Website: springcreekturkeycalls.weebly.com

Offline pauld

  • Hero Member
  • ***
  • Posts: 346
Re: Tuning screw rubbing/squeaking
« Reply #3 on: September 02, 2017, 09:26:20 PM »
If it's the screw, wax. If it's the side there's probably a square spot on the ellipse of the box and the panel is grabbing it. It's fixable but if you've never done it before you may mess ya box up trying. That spot can be "rolled" and smoothed out. David tunes a good box. Check the screw first.

Offline Will

  • 2024 SITE SUPPORTER
  • The Boss Gobbler
  • ********
  • Posts: 901
Re: Tuning screw rubbing/squeaking
« Reply #4 on: September 02, 2017, 09:32:13 PM »
I've sprayed graphite lube in a paper cup then used a q tip to place a drop down the screw hole. If in facts it's the screw. Worked on a few boxes that I've had squeak coming from the screw.

Offline fishr64

  • 2024 SITE SUPPORTER
  • Longbeard
  • ********
  • Posts: 1136
Re: Tuning screw rubbing/squeaking
« Reply #5 on: September 02, 2017, 10:29:51 PM »
I have the same box and had the same thing happen on humid days. If I put just a touch of pressure to keep the paddle from contacting the screw head it went away but wasn't sure how to correct it, until now. I'll be trying bowstring wax on it, thanks for the tip!

Offline Coop1082

  • The Boss Gobbler
  • ****
  • Posts: 931
Re: Tuning screw rubbing/squeaking
« Reply #6 on: September 02, 2017, 11:56:17 PM »
I appreciate all of the help and replies guys!
CRUSADERS
2016-2017-2018-2019 four time Old Gobbler Contest Champions


[/img]

Offline jimmy w

  • Sr. Member
  • **
  • Posts: 123
Re: Tuning screw rubbing/squeaking
« Reply #7 on: September 03, 2017, 03:16:51 PM »
My dad always puts a little candle wax on all his box call screws so bow wax should work the same.gl

Offline Coop1082

  • The Boss Gobbler
  • ****
  • Posts: 931
Re: Tuning screw rubbing/squeaking
« Reply #8 on: September 05, 2017, 12:26:13 PM »
Just a update! I've had success with both graphite powder lube and bow string wax as well! The Halloran runs like a gem now thanks to the bow wax and I had two others that had some squeaking to them also that graphite lube fixed right up! Certainly appreciate all the help guys.
CRUSADERS
2016-2017-2018-2019 four time Old Gobbler Contest Champions


[/img]

Offline Will

  • 2024 SITE SUPPORTER
  • The Boss Gobbler
  • ********
  • Posts: 901
Re: Tuning screw rubbing/squeaking
« Reply #9 on: September 05, 2017, 02:38:50 PM »
I'm glad it worked out for ya brother!

Offline Spring Creek Calls

  • 2024 SITE SUPPORTER
  • Long Spur Gobbler
  • ********
  • Posts: 5411
  • Spring Creek Turkey Calls
Re: Tuning screw rubbing/squeaking
« Reply #10 on: September 05, 2017, 06:53:55 PM »
Glad you got rid of the squeak. It is not a good sound in the woods.
2014  SE Call Makers Short Box 2nd Place
2017  Buckeye Challenge Long Box 5th Place
2018  Mountain State Short Box 2nd Place
2019  Mountain State Short Box 1st Place
2019  NWTF Great Lakes Scratch Box 4th Place
2020 NWTF GNCC Amateur 5th Place Box
2021 Mountain State 3rd Place Short Box
2021 SE Callmakers 1st & 2nd Short Box
E-mail: gobblez@aol.com
Website: springcreekturkeycalls.weebly.com

Offline RossGander

  • Jr. Member
  • *
  • Posts: 3
Re: Tuning screw rubbing/squeaking
« Reply #11 on: July 17, 2018, 02:08:17 PM »
I have the same box and had the same thing happen on humid days. If I put just a touch of pressure to keep the paddle from contacting the screw head it went away but wasn't sure how to correct it, until now. I'll be trying bowstring wax on it, thanks for the tip!

Great tip trying this out too

Offline yelpaholic

  • The Boss Gobbler
  • ****
  • Posts: 628
Re: Tuning screw rubbing/squeaking
« Reply #12 on: July 17, 2018, 04:05:13 PM »
good post ,,,... thanks for the info had a marlin watkins with the same issue cleared it right up.. 

Online vt35mag

  • Longbeard
  • ****
  • Posts: 1777
Re: Tuning screw rubbing/squeaking
« Reply #13 on: July 18, 2018, 08:16:57 AM »
I've sprayed graphite lube in a paper cup then used a q tip to place a drop down the screw hole. If in facts it's the screw. Worked on a few boxes that I've had squeak coming from the screw.

I talked with Marlin about this issue, and he suggested I try this method when needed.