OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: SBE3 pattern warmer temps  (Read 5000 times)

Offline WNCTracker

  • Longbeard
  • ****
  • Posts: 1201
SBE3 pattern warmer temps
« on: March 29, 2017, 08:33:08 PM »
SBE3 26"
Sumtoy .660
40 yds 10"
71 degrees

3" longbeard #6's 1 3/4 oz
272


Longbeard 3.5" #4's at 40 yards
157




Sent from my iPhone using Tapatalk
« Last Edit: February 13, 2018, 08:13:22 PM by WNCTracker »

Offline chaz_z71

  • Jr. Member
  • *
  • Posts: 17
Re: SBE3 pattern warmer temps
« Reply #1 on: March 31, 2017, 11:59:03 AM »
 :popcorn:is that a 3. Inch long beard. That's impressive

Offline WNCTracker

  • Longbeard
  • ****
  • Posts: 1201
SBE3 pattern warmer temps
« Reply #2 on: March 31, 2017, 05:21:37 PM »
 Yes


Sent from my iPhone using Tapatalk

Offline Dr Juice

  • 2024 SITE SUPPORTER
  • Long Spur Gobbler
  • ********
  • Posts: 7347
SBE3 pattern warmer temps
« Reply #3 on: March 31, 2017, 05:24:57 PM »
Impressive. Good luck.

Offline the Ward

  • 2024 SITE SUPPORTER
  • Double Beard
  • ********
  • Posts: 2070
Re: SBE3 pattern warmer temps
« Reply #4 on: April 01, 2017, 06:09:55 PM »
That gobbler is going to leak all over you when you hit em with that pattern!

Offline WVbwhntr

  • Jr. Member
  • *
  • Posts: 10
Re: SBE3 pattern warmer temps
« Reply #5 on: February 08, 2018, 08:43:31 PM »
That is impressive! If you don't mind me asking, have you had anything done to your gun other than putting the choke in? I just bought a new SBE3 and am wanting to get the most out of it I can!

BottomLand54

  • Guest
Re: SBE3 pattern warmer temps
« Reply #6 on: February 08, 2018, 11:30:51 PM »
He Has a sumtoy Mount and a ff3 on it I believe and that’s it unless he is holding out on us. Benellis will scream when you get right choke.


Sent from my iPhone using Tapatalk

Offline WNCTracker

  • Longbeard
  • ****
  • Posts: 1201
SBE3 pattern warmer temps
« Reply #7 on: February 09, 2018, 12:05:16 PM »
He Has a sumtoy Mount and a ff3 on it I believe and that’s it unless he is holding out on us. Benellis will scream when you get right choke.


Sent from my iPhone using Tapatalk
Bottomland is my proxy :-)
I use a Sumtoy .660 choke too. William at Sumtoy has it all figured out just call and talk to him. I tried a .650 and my pattern with the LB 6's 3" got thinner.


Sent from my iPhone using Tapatalk
« Last Edit: February 13, 2018, 08:15:33 PM by WNCTracker »

Offline Cut N Run

  • 2024 SITE SUPPORTER
  • Longbeard
  • ********
  • Posts: 1096
  • North Carolina
Re: SBE3 pattern warmer temps
« Reply #8 on: February 10, 2018, 11:06:46 AM »
That should put a lot of gobblers to sleep. Nice pattern.

Jim
Luck counts, good or bad.