OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: Choke tube for long beard winchester  (Read 5875 times)

Offline RemCrystal

  • Full Member
  • *
  • Posts: 35
Choke tube for long beard winchester
« on: March 13, 2017, 10:14:14 AM »
Just wanting recommendations on choke tubed for rem 1187 12ga. Shooting Winchester long beard number 4s

Offline MISSISSIPPI Double beard

  • 2023 SITE SUPPORTER
  • Double Beard
  • ********
  • Posts: 2203
Re: Choke tube for long beard winchester
« Reply #1 on: March 13, 2017, 12:41:56 PM »
Carlsons long beard choke.
They call him...Kenny..Kenny

Offline RemCrystal

  • Full Member
  • *
  • Posts: 35
Re: Choke tube for long beard winchester
« Reply #2 on: March 13, 2017, 12:57:57 PM »
Thanks.

Offline Cutt

  • The Boss Gobbler
  • ****
  • Posts: 725
Re: Choke tube for long beard winchester
« Reply #3 on: March 14, 2017, 11:02:14 AM »
Keep in mind this choke was designed for Longbeards for the tightest long range patterns. Haven't shot them yet, but from everything I read they are pretty tight with most other chokes to begin with. So now factor in the close range shooting might be way too tight, where another choke might give you a better happy-medium between long and short ranges?

Offline Terry

  • 2024 SITE SUPPORTER
  • Paintbrush Beard
  • ********
  • Posts: 3284
Choke tube for long beard winchester
« Reply #4 on: March 14, 2017, 11:12:50 AM »
Is there a choke that gives good hunting patterns from 10 to 40 yards with the LB's? I've been avoiding them because I don't like a pattern too tight at close ranges...

Sent from my SM-G930V using Tapatalk


Offline Cutt

  • The Boss Gobbler
  • ****
  • Posts: 725
Re: Choke tube for long beard winchester
« Reply #5 on: March 15, 2017, 05:16:46 AM »
Is there a choke that gives good hunting patterns from 10 to 40 yards with the LB's? I've been avoiding them because I don't like a pattern too tight at close ranges...

Sent from my SM-G930V using Tapatalk

I doubt it, would be nice if one existed. At 10 yards they are going to be tight regardless. Just something one has to expierment with for the best long and short range combination. Guess it comes down to a compromise, give up a little tightness at 40, where 10 will not be that bad depending on the choke?

Offline SumToy

  • Double Beard
  • *****
  • Posts: 2223
    • sumtoycustoms
Re: Choke tube for long beard winchester
« Reply #6 on: March 15, 2017, 07:46:41 AM »
650 with 6's.   Open up to 660 to 665 with 4's or 5's. Now if 3 inch gun you can fudge little.  Now we have few guys that are running 4's out the 650.  I have not tried it but plan on it.
Tell us just how dead do you want them to be and we will see if we can get that for you.
Building American made products with American made CNC's and Steel.  Keep all the service Men and Women that gave a LIFE for our FREEDOM a live when you buy American.  God Bless the USA


Offline turkeykiller41

  • Sr. Member
  • **
  • Posts: 131
Re: Choke tube for long beard winchester
« Reply #7 on: March 15, 2017, 11:24:18 AM »
I am shooting a 680 flush carlsons with 3'' #6s and got 180s in the 10 at 40yds this was on a 30 degree morning going to shoot more when it warms up should get a little better.

Online sswv

  • The Boss Gobbler
  • ****
  • Posts: 728
Re: Choke tube for long beard winchester
« Reply #8 on: March 24, 2017, 09:30:33 PM »
I'm shooting 3" #6 Longbeards in a 21" 870 with a .665 Remington SF choke and averaged 235 in the 10 ring at 40yds.  Shot the same 6's (same gun) with a Preston Pittman ported choke .672 and averaged 220.

Offline RemCrystal

  • Full Member
  • *
  • Posts: 35
Re: Choke tube for long beard winchester
« Reply #9 on: March 28, 2017, 10:07:10 AM »
I've patterned 3in size 4 with just a modified choke and have had good pellets in the kill zone along with a pattern that isn't so tight. Anyone else experience this?

Offline turkeykiller41

  • Sr. Member
  • **
  • Posts: 131
Re: Choke tube for long beard winchester
« Reply #10 on: March 28, 2017, 12:58:14 PM »
I have not tried a modified but I was really suprised at how good the Carlsons 680 flush tube did with the 6s.

Offline tha bugman

  • Paintbrush Beard
  • *****
  • Posts: 3896
Re: Choke tube for long beard winchester
« Reply #11 on: March 30, 2017, 09:06:08 AM »
Is there a choke that gives good hunting patterns from 10 to 40 yards with the LB's? I've been avoiding them because I don't like a pattern too tight at close ranges...

Sent from my SM-G930V using Tapatalk
Talk to Sumtoy they are building me a choke now for those ranges

Offline Bevis-Ridge-Outdoors

  • Jr. Member
  • *
  • Posts: 3
Re: Choke tube for long beard winchester
« Reply #12 on: April 11, 2017, 09:37:12 AM »
My setup is Remington 870 SUPER MAG 26" barrel with a Kicks GT .665 and shooting 3.5" Long Beard XR #5s 2 oz.

K-I-L-L-E-R PATTERNS!

 :newmascot:

Offline turkeykiller41

  • Sr. Member
  • **
  • Posts: 131
Re: Choke tube for long beard winchester
« Reply #13 on: April 11, 2017, 02:42:23 PM »
What kind of numbers are you getting with the modified choke.