SX3 NWTF Cantilever Mount

[hd mike]

• Tweet

I had a chance to purchase a new SX3 NWTF Edition 12ga. with a Cantilever mounted 24" barrel. I have a Leupold VX-1 scope (with the turkey plex) and would like to know how to mount the scope. Can I go with just scope rings, or do I need some kind of mount ? I'm all new to the cantilever system, never used or shot one before.

[Duffer58]

• Tweet

The SX3 cantilever base is a weaver style base.  Your scope rings will mount directly to the base.

[hd mike]

• Tweet

The SX3 cantilever base is a weaver style base.  Your scope rings will mount directly to the base.

Thank you for the info !

[1iagobblergetter]

• Tweet

The SX3 cantilever base is a weaver style base.  Your scope rings will mount directly to the base.

x2...my favorite setup when wanting to mount a scope..I bet you'll really like that Leupold..Post up a pic if you get a chance...

[the Ward]

• Tweet

Yes, just need weaver type rings. Probably would go with the lowest height rings that the scope will allow, as the cantilever will set up a little higher than a receiver mounted base. Nice thing about them is it will maintain zero if you remove the barrel, as the scope/barrel stay together as a unit.

[Deast1988]

• Tweet

Went with Weaver low mounts. I have a sx3 NWTF 20ga I put a 1.5-4 leupold AR scope on I had the scope laying around from another project.

[Duffer58]

• Tweet

Looks great.  Have you had a chance to shoot it yet?  If so - how did it pattern?

[Deast1988]

• Tweet

It smokes



Nitro striaght 7s I get consistent 220+ at 40yds.

[Deast1988]

• Tweet

Ive shot the extra full with heavyweight 7s mag blend heavyweight 6s wasn't impressed.
Pure gold .555 was sweet spot for me 150s with #7 heavy weight. 110 with heavyweight 6, 160s with magblend. The nitro 1 5/16 #7 just throws a dense pattern. Its first season I went with a scope last year I had FF2. But the cross hairs I dialed in at 10yds then did some 20 an 30yd test then made sure 40 was one. Bird was 25yds when I shot yesterday.

[Duffer58]

• Tweet

Nice looking bird.  Well done! 

[lunghit]

• Tweet

My SX3 smokes them too!

[Ohio hunter88]

• Tweet

Smoke one. With my sx3 as well.  Going to get mine drilled and tapped for a red dot. Very soon

[mossyoakpro]

• Tweet

I'm really pondering this gun to upgrade to....You guys may have inspired me!  I like the looks of the Longbeard model because of the pistol grip and the stock that can be adjusted.

Thanks for the inspiration and congrats on the birds!!!