OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: Scope Bases for Winchester Super X2??  (Read 6800 times)

Offline BDeal

  • Hero Member
  • ***
  • Posts: 499
Scope Bases for Winchester Super X2??
« on: February 11, 2016, 09:25:24 AM »
I'm looking for a scope base for my Super X2. All I can find is saddle style bases and I'm not crazy about how they look. Can anyone suggest a good base for this gun that is not a saddle-style?

Thank You!

Offline VaBoy

  • Full Member
  • *
  • Posts: 91
Re: Scope Bases for Winchester Super X2??
« Reply #1 on: February 11, 2016, 05:34:18 PM »
Carried mine to a local gunsmith and had him drill and tap it and put a picitiny rail on it .Winchester did not recommend drilling and tapping but I have had a Eotech 512 mounted on it for several years and shot many 3.5" hot Nitro loads thru it with no issues.

Offline BDeal

  • Hero Member
  • ***
  • Posts: 499
Re: Scope Bases for Winchester Super X2??
« Reply #2 on: February 12, 2016, 10:02:06 AM »
Mine came drilled and tapped for a scope from the factory. I'm just looking for the right scope base.

Offline VaBoy

  • Full Member
  • *
  • Posts: 91
Re: Scope Bases for Winchester Super X2??
« Reply #3 on: February 13, 2016, 11:34:13 AM »
Email Winchesters customer service and I'm sure they can tell you

Offline KPcalls

  • Hero Member
  • ***
  • Posts: 224
Re: Scope Bases for Winchester Super X2??
« Reply #4 on: February 13, 2016, 12:13:06 PM »
 I bought one for my SX3 straight from Winchester for 30.00....someone mentioned that another would fit for alot cheaper...but, I don't remember which one.

Offline wmn2

  • The Boss Gobbler
  • ****
  • Posts: 569
Re: Scope Bases for Winchester Super X2??
« Reply #5 on: February 13, 2016, 04:19:19 PM »
I sent you a PM. I just got one for my SXP from weaver. Got it for 7.99 off amazon. 416T is the number. It says it's for the 1300/1400, but it fits my sip perfectly. You may look into that.

Offline BDeal

  • Hero Member
  • ***
  • Posts: 499
Re: Scope Bases for Winchester Super X2??
« Reply #6 on: February 15, 2016, 11:30:42 AM »
Thanks guys! I ordered directly from Winchester for $35 and then found one later for $19.99......