OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: 410 roll crimp  (Read 4880 times)

Offline Swampchickin234

  • The Boss Gobbler
  • ****
  • Posts: 714
410 roll crimp
« on: March 31, 2015, 04:13:02 PM »
Any of y'all roll crimp with the 410?   If so , where do you get you're data?  Thanks


Sent from my iPhone using Tapatalk

Offline gobblergls

  • Hero Member
  • ***
  • Posts: 450
Re: 410 roll crimp
« Reply #1 on: April 01, 2015, 01:31:05 PM »
I roll crimp my .410 loads with a hand-cranked crimper from Italy.  Precision Reloading makes a good head that can be used in an electric drill or drill press.  My data comes from the supplier of Tungsten Super Shot.

Offline Swampchickin234

  • The Boss Gobbler
  • ****
  • Posts: 714
410 roll crimp
« Reply #2 on: April 01, 2015, 03:44:35 PM »

I roll crimp my .410 loads with a hand-cranked crimper from Italy.  Precision Reloading makes a good head that can be used in an electric drill or drill press.  My data comes from the supplier of Tungsten Super Shot.
thank you   


Sent from my iPhone using Tapatalk

Offline Jstocks

  • Hero Member
  • ***
  • Posts: 334
Re: 410 roll crimp
« Reply #3 on: February 24, 2016, 09:53:48 AM »
I use a drill to roll crimp mine. It's tough to get them looking as good as the 20's, but they shoot good. I too received my data from the shot supplier.

Offline DocHolliday

  • Hero Member
  • ***
  • Posts: 357
Re: 410 roll crimp
« Reply #4 on: February 25, 2016, 11:02:35 PM »
You mean like this:



Thanks Gil!

Made with French antique hand cranked crimper.

Offline lead 6s

  • Jr. Member
  • *
  • Posts: 6
Re: 410 roll crimp
« Reply #5 on: March 16, 2016, 06:19:24 AM »
You mean like this:



Thanks Gil!

Made with French antique hand cranked crimper.

Thats good  :) gota get me a roll crimper load the 410.