OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






News:

registration is free , easy and welcomed !!!

Main Menu

Benelli M2 / Win SX3 and long beards

Started by camodawg, February 16, 2014, 07:02:32 PM

Previous topic - Next topic

camodawg

First off, these guns have never been deep cleaned or polished. we use them for doves, ducks and turkeys. I'm sure we could get better numbers if we did but I'm pretty happy with these numbers.
It was around 63 degrees and sunny with very little wind. I used a rangefinder and the target was at 40.5 yards from the end of the barrel.
Benelli M2 3" mag-blend through a Sumtoy .650 choke got 180 in the 10" which is on par with last year.
Benelli M2 3" shooting a #4 long beard through a Sumtoy .650 choke got 139 in the 10" circle
Benelli M2 3# shooting a #4 long beard with a .670 haymaker got  103 in the 10" circle
The Benelli has a 26" barrel.

Winchester SX3 with a 28" barrel
Shooting a .665 Indian creek choke with a 3 1/2" Hevi 13 #6 got 187 in the 10" Circle
SX3 with the indian creek .665 and a 3 1/2" #5 long beard got 180 in the 10
SX3 with a Mad Max super .675 choke and 3 1/2" #5 long beard got 141 in the 10
SX3 with a Mad Max .675 and a 3" #4 long Beard got 99 in the 10
I should have shot the #4 through the Indian creek choke instead of the mad max but we were running out of time.
I know yall like pictures but I havent taken any yet. I still have the targets and can take some and post them later if yall want.

knightrider


camodawg

Here is the Benelli M2 at 40.5 yds with a 650 Sumtoy and a winchester #4 long beard. the pattern has some holes in it but I thought it was pretty good for #4's at 40 yds.

camodawg

This is the Winchester SX3 at 40.5 yds with the indian creek .665 and the 3 1/2" long beard #5's

camodawg

This pattern is from today at 20yds. with the SX3 and 3 1/2" #5's. For reference the red dot is around 1"

SumToy

That is bad for the 4's.  That is the high number for them out of our chokes as of now.  :drool:
Tell us just how dead do you want them to be and we will see if we can get that for you.
Building American made products with American made CNC's and Steel.  Keep all the service Men and Women that gave a LIFE for our FREEDOM a live when you buy American.  God Bless the USA


darn2ten

I would love to see the 3" #4 in the SX3 with the IC .665. I've got a 26" Invector plus browning that I have shot twice at 40 with the 3" LB 5's. The first time I got 203 and the 2nd I got 188, I have thought about buying a box of 4's to try.

camodawg

Here are a couple of pictures I shot today. It was around 70 degrees and this is with the SX3 with Indian creek .665 choke. 1 is with a 3 1/2" #4 and the other is with a3 1/2" #6.

Gold Spur

Woo Pig Sooie!!!

tomstopper