Choke Tube and Ammo Recomendation for 20ga.

[campcreekfarm]

• Tweet

What choke tube/ammo recommendation would yall make for a Benelli M1 3" 20gauge with a 26" barrell ?  Also for a Remington 870 20 ga. 3" with a 26" barrell.  Thanks

[shootumindaface]

• Tweet

What shells you intend to shoot

[TCKev]

• Tweet

For the 870, Federal Heavy Weights #7 with a Remington Super Full choke .570 from Midwest Guns for $9.99 has been doing great from what I've seen on here and my short range time with it.

[R AJ]

• Tweet

870 Rem 26" barrel using Hevi-13 #7s most chokes in the 560-565 range are going to be very acceptable and 570 not that bad either. The newer H-13 in 5 /box #6s are getting good reviews in the 570 choke. I concern myself with what these patterns look like at 30-35 yards more so than 40 since I rarely shoot that far even with the 12 gauge.

If you use lead only then a 560s range and Win XX #6s or Federal FC #6s and then #5s would do well for the 30 yard and under range especially.

Good Luck

[gobblenomore]

• Tweet

Same question for the Benelli M1 90 will  be using Nitro 3" #7 hevishot
I'm trying to decide between IC and PG tubes

[shootumindaface]

• Tweet

Same question for the Benelli M1 90 will  be using Nitro 3" #7 hevishot
I'm trying to decide between IC and PG tubes

Go with the PG 570, the 555 will most likely put up a lil bit better numbers but boy is it tight inside 30

[surehuntsalot]

• Tweet

using a Carlson .575 in my 870 20ga youth model with Federal HW #7's

[campcreekfarm]

• Tweet

Anyone ever try the SSX 20 ga. tube in either one of these guns?

[thundrchikin]

• Tweet

The SSX is unavailible for Benellis in 20ga. They are only made for the Rem choke threads. A friend has a Benelli Nova and has great patterns with the Carlsons 575 non-ported and Fed #7 HW.