OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: M2 Choke Full Choke diameter (factory)  (Read 832 times)

Offline EKavanagh

  • Full Member
  • *
  • Posts: 24
M2 Choke Full Choke diameter (factory)
« on: October 05, 2022, 09:28:32 AM »
Does anyone know the diameter/constriction of the factory full coke in the 20ga Benelli M2?

I tried searching online but no luck.

Thanks.

Offline Guskie

  • Full Member
  • *
  • Posts: 99
Re: M2 Choke Full Choke diameter (factory)
« Reply #1 on: October 05, 2022, 11:21:21 AM »
I'm fairly sure it's .590. I can measure one tonite

Offline Glades

  • Full Member
  • *
  • Posts: 89
Re: M2 Choke Full Choke diameter (factory)
« Reply #2 on: October 05, 2022, 01:09:56 PM »
From Trulock and Carlsons:
590 XF
595 F
600 IM

For factory chokes, you might want to check with calipers. But it should be 595 for Full

Offline EKavanagh

  • Full Member
  • *
  • Posts: 24
Re: M2 Choke Full Choke diameter (factory)
« Reply #3 on: October 05, 2022, 03:06:44 PM »
Great. Thanks guys. Just got it and will be figuring out choke selection over the winter.

Offline lacire

  • The Boss Gobbler
  • ****
  • Posts: 657
Re: M2 Choke Full Choke diameter (factory)
« Reply #4 on: October 05, 2022, 04:41:56 PM »
Glades is right, I just checked mine and it’s .595 for the full choke.
Print by Madison Cline, on Flickr