OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Box call checkering ?

Started by Chustzc, September 17, 2021, 07:13:56 PM

Previous topic - Next topic

culpeper

For a body, it's hard to beat Honduran Mahogany and for a lid Black Walnut has been a proven winner.  Good luck and if possible show us some pics of your progress.

Chustzc

Thanks guys your help has helped me get a good start I have new chisels and I sharpened them following some YouTube videos but what's the best angle for checkering in thing 20 deg?


Sent from my iPhone using Tapatalk
2021 Mississippi call makers 1st place trumpet
2021 Mississippi call makers 3rd place trumpet

gonehuntin982

Chustzc, Most chisels are 25 or 30 degrees I have all mine sharpened at 30 degrees

Mike

Chustzc

My first attempt how does it look ?





Sent from my iPhone using Tapatalk
2021 Mississippi call makers 1st place trumpet
2021 Mississippi call makers 3rd place trumpet

callmakerman


gonehuntin982

Really doesn't look bad for the first time !
I'm just glad to see someone willing to do the checkering by hand !!

Chustzc

Yes hollowed the inside by hand also


Sent from my iPhone using Tapatalk
2021 Mississippi call makers 1st place trumpet
2021 Mississippi call makers 3rd place trumpet

Beards and Hooks

Quote from: Chustzc on October 12, 2021, 08:44:20 PM
My first attempt how does it look ?





Sent from my iPhone using Tapatalk
Looks good to me buddy!!

Tarheel

A scrap piece of flat marble and a sheet of fine sandpaper will work for sharpening chisels, too....

aclawrence

Since you only need one or two sizes I would go for some really good one. Maybe some Veristas with the pmv11 steel.


Sent from my iPhone using Tapatalk

gonehuntin982

Quote from: aclawrence on December 14, 2021, 03:45:50 PM
Since you only need one or two sizes I would go for some really good one. Maybe some Veristas with the pmv11 steel.


Sent from my iPhone using Tapatalk

Over the years I was able to find a box full of the old Stanley #60 chisels made in the 50s and 60s they are made with good steel and hold an edge very well I use a Work Sharp sharpener at 25 degrees I sent a two to Jeff Lacey I hope he likes them  ;D and Ive been ask a bunch of times when cutting the V on the checkering the bevel on the chisel is down!

culpeper

Quote from: gonehuntin982 on December 15, 2021, 09:54:10 AM
Quote from: aclawrence on December 14, 2021, 03:45:50 PM
Since you only need one or two sizes I would go for some really good one. Maybe some Veristas with the pmv11 steel.


Sent from my iPhone using Tapatalk

Over the years I was able to find a box full of the old Stanley #60 chisels made in the 50s and 60s they are made with good steel and hold an edge very well I use a Work Sharp sharpener at 25 degrees I sent a two to Jeff Lacey I hope he likes them  ;D and Ive been ask a bunch of times when cutting the V on the checkering the bevel on the chisel is down!

If you looked at some fine, very well done checkering, could you tell if the bevel was up or down? ;)

gonehuntin982

Quote from: culpeper on December 16, 2021, 09:08:29 AM
Quote from: gonehuntin982 on December 15, 2021, 09:54:10 AM
Quote from: aclawrence on December 14, 2021, 03:45:50 PM
Since you only need one or two sizes I would go for some really good one. Maybe some Veristas with the pmv11 steel.


Sent from my iPhone using Tapatalk

Over the years I was able to find a box full of the old Stanley #60 chisels made in the 50s and 60s they are made with good steel and hold an edge very well I use a Work Sharp sharpener at 25 degrees I sent a two to Jeff Lacey I hope he likes them  ;D and Ive been ask a bunch of times when cutting the V on the checkering the bevel on the chisel is down!

If you looked at some fine, very well done checkering, could you tell if the bevel was up or down? ;)

Scott I think if you ask call makers that hand checker you would get an answer if you want an answer from me it is YES

culpeper

Mike, I did ask you.
I can tell you this, because I have watched other callmakers do it both ways, I too have checkered bevel down and bevel up, there is no way I can tell, except perhaps with a microscope so I can see how the cells were compressed.
Perhaps your eyes are better than mine. ;)

trb136

Quote from: culpeper on December 16, 2021, 03:56:58 PM
Mike, I did ask you.
I can tell you this, because I have watched other callmakers do it both ways, I too have checkered bevel down and bevel up, there is no way I can tell, except perhaps with a microscope so I can see how the cells were compressed.
Perhaps your eyes are better than mine. ;)
How the cells were compressed?? That's some funny  right there.  Mike could make a great call with a  rubber chisel!