OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: M2 20ga Trigger Work  (Read 1756 times)

Offline twyatt

  • The Boss Gobbler
  • ****
  • Posts: 613
M2 20ga Trigger Work
« on: May 04, 2021, 05:56:18 PM »
Anyone had their trigger worked on? Mine has some creep and is heavy. 

Offline MattinIdaho

  • Hero Member
  • ***
  • Posts: 345
Re: M2 20ga Trigger Work
« Reply #1 on: May 04, 2021, 06:20:42 PM »
Mine needs some work too. Out of my 3 Remingtons a Charles Daly and the M2, the Benelli has the worst trigger.

Offline Prohunter3509

  • The Boss Gobbler
  • ****
  • Posts: 707
Re: M2 20ga Trigger Work
« Reply #2 on: May 04, 2021, 06:30:49 PM »
Yeah need same thing

Offline DBuck90

  • Sr. Member
  • **
  • Posts: 139
Re: M2 20ga Trigger Work
« Reply #3 on: May 08, 2021, 01:31:49 AM »
Anyone had their trigger worked on? Mine has some creep and is heavy.
cheapest way and it makes a huge improvement order a taran tactical trigger and hammer spring best $20 i spent

Offline twyatt

  • The Boss Gobbler
  • ****
  • Posts: 613
Re: M2 20ga Trigger Work
« Reply #4 on: May 08, 2021, 07:29:07 PM »
Taran told me it only works on the 12ga.  I was about to buy it but figured I’d call them just to check, and they told me no, 12ga only

Offline Trkmaster88

  • Full Member
  • *
  • Posts: 99
Re: M2 20ga Trigger Work
« Reply #5 on: May 08, 2021, 09:15:43 PM »
Taran told me it only works on the 12ga.  I was about to buy it but figured I’d call them just to check, and they told me no, 12ga only

I put their trigger spring in all my Benelli's/Franchi's. 12 and 20 it's the same. Their hammer spring makes it way too light and don't want to be light striking the primer. Replace the trigger spring and do a little polishing work to the hammer/sear and you're set.

Offline ShortMagFan

  • Sr. Member
  • **
  • Posts: 161
Re: M2 20ga Trigger Work
« Reply #6 on: May 11, 2021, 10:07:32 PM »
My trigger group,is at Briley getting their match trigger installed. It’s spendy though