What lathe do you guys think is the best for turning strikers?
I am aware that this is a lot to do with personal preference, but I am just looking for some models I can research myself.
I am wanting to get into the world of 1 piece strikers, so I will see what happens.
Thanks in advance guys!!
Josh
Jet 1221vs
Sent from my SM-N975U using Tapatalk
i use a Nova comet 2,,, works for me,,,,,,,,,,,,,,,
if it was for strikers nothing else craftsman or harbor freight always see then local craigslist
40 50 bucks
I appreciate ya'll's replies.
Y'all have got the research jump started.
I'm sure I will have some further questions moving forward.
Be careful getting a lathe
....that's just the beginning of going down a slippery slope of expenses.
Lots of fun, but you will quickly find yourself wanting to do more.
I would agree with the previous post of finding one on Craigslist if you're truly interested in just strikers.
Quote from: buckmark13 on August 16, 2020, 11:37:55 PM
Be careful getting a lathe
....that's just the beginning of going down a slippery slope of expenses.
Lots of fun, but you will quickly find yourself wanting to do more.
I would agree with the previous post of finding one on Craigslist if you're truly interested in just strikers.
I agree its just the beginning of a slippery slope of expenses, so why not get a top notch lathe with a great warranty and be done with it?
Sent from my SM-N975U using Tapatalk
Vicmarc lathes. It will last a lifetime.
Quote from: BigSlam51 on August 16, 2020, 11:58:22 PM
Quote from: buckmark13 on August 16, 2020, 11:37:55 PM
Be careful getting a lathe
....that's just the beginning of going down a slippery slope of expenses.
Lots of fun, but you will quickly find yourself wanting to do more.
I would agree with the previous post of finding one on Craigslist if you're truly interested in just strikers.
I agree its just the beginning of a slippery slope of expenses, so why not get a top notch lathe with a great warranty and be done with it?
Sent from my SM-N975U using Tapatalk
Because spending the cash on a OneWay, Robust, Powermatic, etc. to make some strikers and see if you enjoy it seems to be overkill. At least to me. Why not buy a nice, used one and try it out. Find out if you enjoy it. See what else you might want to make in the future. Get in for very little investment, then upgrade if / when you want to. You'll be able to sell that used lathe for what you probably paid for it, and get a lot of experience and insight along the way before going all in on something you may later realize that you don't need, want, or enjoy.
My two cents though, but as always it's worth about two cents!
Quote from: buckmark13 on August 18, 2020, 11:40:22 AM
Quote from: BigSlam51 on August 16, 2020, 11:58:22 PM
Quote from: buckmark13 on August 16, 2020, 11:37:55 PM
Be careful getting a lathe
....that's just the beginning of going down a slippery slope of expenses.
Lots of fun, but you will quickly find yourself wanting to do more.
I would agree with the previous post of finding one on Craigslist if you're truly interested in just strikers.
I agree its just the beginning of a slippery slope of expenses, so why not get a top notch lathe with a great warranty and be done with it?
Sent from my SM-N975U using Tapatalk
Because spending the cash on a OneWay, Robust, Powermatic, etc. to make some strikers and see if you enjoy it seems to be overkill. At least to me. Why not buy a nice, used one and try it out. Find out if you enjoy it. See what else you might want to make in the future. Get in for very little investment, then upgrade if / when you want to. You'll be able to sell that used lathe for what you probably paid for it, and get a lot of experience and insight along the way before going all in on something you may later realize that you don't need, want, or enjoy.
My two cents though, but as always it's worth about two cents!
I started with an old craftsman lathe, moved to a jet. I just figured since to OP already makes calls, he'd probably like it...
Sent from my SM-N975U using Tapatalk