Turkey hunting forum for turkey hunting tips

Turkey Guns & Shooting => 12 ga Winchester turkey gun patterns => Topic started by: Spring Creek Calls on May 16, 2013, 11:56:33 AM

Title: Win 1300 - IC .660- Hevi 7's
Post by: Spring Creek Calls on May 16, 2013, 11:56:33 AM
Traded for the IC .660 tube this spring but didn't get a chance to test before my first trip. Put it on the end of my Win 1300 26" barrel this morning and shot a Hevi 13 2oz. 7 for this test.  Wind was calm,  70 degrees, shooting at a laser measured 40 yards.  Picked up a bunch of pellets over the 22" barrel and a GT .655.

(http://i794.photobucket.com/albums/yy227/moses25roman/20130516_102140_zpseb96707d.jpg)
(http://i794.photobucket.com/albums/yy227/moses25roman/20130516_100853_zpsaadf0420.jpg)



Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: ILIKEHEVI-13 on May 16, 2013, 03:58:55 PM
That is a excellent pattern.   :z-winnersmiley:
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: Spring Creek Calls on May 16, 2013, 04:13:51 PM
Quote from: ILIKEHEVI-13 on May 16, 2013, 03:58:55 PM
That is a excellent pattern.   :z-winnersmiley:

Thanks,  I liked how even it was. I aimed low as my 22" barrel shoots a bit high with the Tru Glo sights.  I'll shoot the IC tube with the 22" barrel, but doubt I'll exceed the 26" barrel numbers.
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: Gold Spur on May 16, 2013, 05:55:16 PM
That's a killing combo right there... :icon_thumright:
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: mossyoakpro on May 16, 2013, 07:39:55 PM
That is as pretty a pattern as you could ask for....very nice!!
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: tomstopper on May 16, 2013, 10:46:25 PM
Great pattern.....
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: mikejd on May 17, 2013, 12:24:14 PM
Nice pattern. Any numbers? My 1300 with 22" barell and the same choke shooting
3" 2oz #6's puts 260 in the 10".
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: Spring Creek Calls on May 17, 2013, 02:41:47 PM
Quote from: mikejd on May 17, 2013, 12:24:14 PM
Nice pattern. Any numbers? My 1300 with 22" barell and the same choke shooting
3" 2oz #6's puts 260 in the 10".

All numbers are next to the pattern pic.  279 hits in the 10.
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: mikejd on May 17, 2013, 09:37:06 PM
Quote from: Spring Creek Calls on May 17, 2013, 02:41:47 PM
Quote from: mikejd on May 17, 2013, 12:24:14 PM
Nice pattern. Any numbers? My 1300 with 22" barell and the same choke shooting
3" 2oz #6's puts 260 in the 10".

All numbers are next to the pattern pic.  279 hits in the 10.

Thanks, I was looking at it on my phone at work and overlooked that. Anyhow thats a nice looking pattern. I love the 1300.
Have you deep cleaned your barrel.
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: Spring Creek Calls on May 18, 2013, 07:51:14 AM
Quote from: mikejd on May 17, 2013, 09:37:06 PM
Quote from: Spring Creek Calls on May 17, 2013, 02:41:47 PM
Quote from: mikejd on May 17, 2013, 12:24:14 PM
Nice pattern. Any numbers? My 1300 with 22" barell and the same choke shooting
3" 2oz #6's puts 260 in the 10".

All numbers are next to the pattern pic.  279 hits in the 10.

Thanks, I was looking at it on my phone at work and overlooked that. Anyhow thats a nice looking pattern. I love the 1300.
Have you deep cleaned your barrel.

I have not deep cleaned my barrel. The barrel is as cleaned after each shooting, just shy of deep cleaning.
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: mikejd on May 18, 2013, 08:08:10 AM
I reccomend a deep clean. It will definetly improve your numbers. I thought I was clean to until I deep cleaned.

Before I switched to hevi I used to shoot win HV #4. With a clean barrel I was putting about 55 hits in a 10" so I deep cleaned and jumped to the high 90's. I would not have even believed it if I did not do it myself.

Go to clarks site allaboutshooting for a tutorial and fallow his method.
Its worth the 10 minutes or so just to see. Now I'm probably  going to polish just to see.

Good luck.
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: jblackburn on May 20, 2013, 10:44:13 PM
Yeah, that should do!
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: mightyjoeyoung on May 24, 2013, 09:02:12 PM
Nice pattern!  But...Hmmm...279 pellets in the 10" @ 40 yards with a 3" load and there are guys that STILL think you need to deep claen that barrel??!!  Not a chance!  That gun likes that load just the way it is!  If I were you I wouldn't mess with it one little bit.  You MIGHT get better after a deep clean, but then again, you might not and worse, you might get a worse pattern.  I'd leave it be.
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: mikejd on May 24, 2013, 11:22:47 PM
Quote from: mightyjoeyoung on May 24, 2013, 09:02:12 PM
Nice pattern!  But...Hmmm...279 pellets in the 10" @ 40 yards with a 3" load and there are guys that STILL think you need to deep claen that barrel??!!  Not a chance!  That gun likes that load just the way it is!  If I were you I wouldn't mess with it one little bit.  You MIGHT get better after a deep clean, but then again, you might not and worse, you might get a worse pattern.  I'd leave it be.

Good point.
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: turkeyfeathers on May 25, 2013, 03:15:26 PM
My shoulder is still black n blue from pattern testing my 1300 15 years ago. Nice set up. Dead bird(s) there   I don't know much about deep cleaning nor polishing but I think I'd leave her alone  ain't broke, don't fix it scenario
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: DirtNap647 on May 25, 2013, 04:54:23 PM
nice pattern
Title: Re: Win 1300 - IC .660- Hevi 7's
Post by: Spring Creek Calls on May 25, 2013, 08:08:13 PM
Quote from: mightyjoeyoung on May 24, 2013, 09:02:12 PM
Nice pattern!  But...Hmmm...279 pellets in the 10" @ 40 yards with a 3" load and there are guys that STILL think you need to deep claen that barrel??!!  Not a chance!  That gun likes that load just the way it is!  If I were you I wouldn't mess with it one little bit.  You MIGHT get better after a deep clean, but then again, you might not and worse, you might get a worse pattern.  I'd leave it be.

I have no plan to mess with the 26" barrel, but may deep clean the 22" to see if I can get some better numbers.