Turkey hunting forum for turkey hunting tips
Turkey Calls => Call Making => Topic started by: Brwndg on March 16, 2023, 09:55:15 PM
-
Wingbone Filler between Bones?
What do you all use to fill in the transition between bones to smooth them out?
I read somewhere Lumber epoxy putty. Any other ideas?
-
I use 10 minute epoxy and I mix it up a little thick. Use a popsicle stick to press it in the joints. Then I will start building up next to the joints with colored sewing threads and wrap it like crazy. I have used red, white and blue thread for some that I made for a friend who is a Retired Marine. Then I did several with purple and gold threads "LSU" colors. I built the threads up and then layer on the epoxy. Make sure that you clean the bones really well and clean out the inside of the bones with a dremel tool. Do a dry run fitting them together and make a small mark with a pen so you know what fits where. Good luck Bud!!!
Have a good one and May God bless y'all, Bo
Sent from my SM-S908U using Tapatalk
-
I’ve always used that two part epoxy putty stick they sell in the marine section at Walmart. Let it set, sand it down.
Sent from my iPhone using Tapatalk
-
I’ve always used that two part epoxy putty stick they sell in the marine section at Walmart. Let it set, sand it down.
Sent from my iPhone using Tapatalk
Same here...