Turkey hunting forum for turkey hunting tips

So I've read a lot of guys on here saying they don't condition ceramic calls, but recently I've been playing my ceramic call a lot lately and I can see white circles from where I've been playing on the ceramic and it's began to get slick in those particular spots.. I've read Mike Battey (guy who made the ol yeller and a bunch of different ceramic calls) has said online to use diamond screen or diamond paper. Just wondering what I could do to get rid of those white spots and make it rough again thanks.

Depending on the ceramic , i clean them with an alcohol pad and between i use a scotch brite pad and just make sure i keep my striker tip clean... I'm sure your going to get a lot of opinions from sanding to whatever, again i think it has to do with the ceramic ... I always keep a couple of these alcohol pads in my satchel...

The one I got from Stumpy came with a stone. I can't comment other than that as it is the only one I have owned.

Quote from: Greg Massey on June 04, 2022, 03:50:14 PM
Depending on the ceramic , i clean them with an alcohol pad and between time i use a scotch brite pad and just make sure i keep my striker tip clean... I'm sure your going to get a lot of opinions from sanding to whatever, again i think it has to do with the ceramic ... I always keep a couple of these alcohol pads in my satchel...

Thanks for the response Greg, and I have tried using denatured alcohol on the ceramic as advised by the call maker but once it dried the ceramic went back to where I can see the white spots that feel a little slicker.

Scotch   Brite on ceramic and strikers.  Alcohol preps if necessary.

Red Scotch Brite is what I use. Keep striker tip clean.

220 grit sandpaper is what I use. Like others have said red scotch brite works. But I like 220 grit sandpaper better than anything I've tried.

Red scotch brite

Red scotch brite and I'm running it with a micarta striker. Grabs it really well.

Quote from: callmakerman on June 07, 2022, 06:08:10 AM
Red scotch brite and I'm running it with a micarta striker. Grabs it really well.

Man, Bill, I'd never thought of micarta for a striker material, certainly never had one, but I bet that is nasty on a ceramic. Now to try to track down a micarta striker.


Sent from my iPhone using Tapatalk

Might be a hard find. Heard Micarta trees were on an endangered list.....hahaha. But if you find 2 in New York let me know!   

Quote from: ChesterCopperpot on June 07, 2022, 08:41:30 AM

Quote from: callmakerman on June 07, 2022, 06:08:10 AM
Red scotch brite and I'm running it with a micarta striker. Grabs it really well.

Man, Bill, I'd never thought of micarta for a striker material, certainly never had one, but I bet that is nasty on a ceramic. Now to try to track down a micarta striker.
I turned one on a whim one day and let's just say it was a real pain in the backside. The striker in question has been sitting around for maybe 10 years now till I decided to try it on the Butski copy I made. Works really well and will have a spot in the vest from now on for this call. I will also say that I really have no desire to try doing another. Doing certain turnings with micarta like pots is not that bad other than it stinks like hell and makes a big mess plus very hard on tools. Doing a striker is a whole different animal and not enjoyable at all.

Quote from: callmakerman on June 07, 2022, 12:56:27 PM
I turned one on a whim one day and let's just say it was a real pain in the backside. The striker in question has been sitting around for maybe 10 years now till I decided to try it on the Butski copy I made. Works really well and will have a spot in the vest from now on for this call. I will also say that I really have no desire to try doing another. Doing certain turnings with micarta like pots is not that bad other than it stinks like hell and makes a big mess plus very hard on tools. Doing a striker is a whole different animal and not enjoyable at all.

Makes sense. Well, if you ever sell that personal one I'm your huckleberry!


Sent from my iPhone using Tapatalk

Alcohol pads and light rubbing of scotch brite also had good luck with adding a bit of railroad chalk to the surface

Quote from: Joneshunter on June 04, 2022, 05:17:22 PM

Quote from: Greg Massey on June 04, 2022, 03:50:14 PM
Depending on the ceramic , i clean them with an alcohol pad and between time i use a scotch brite pad and just make sure i keep my striker tip clean... I'm sure your going to get a lot of opinions from sanding to whatever, again i think it has to do with the ceramic ... I always keep a couple of these alcohol pads in my satchel...

Thanks for the response Greg, and I have tried using denatured alcohol on the ceramic as advised by the call maker but once it dried the ceramic went back to where I can see the white spots that feel a little slicker.

If you are seeing white spots on that ceramic , it makes me think, it wasn't condition right with someone over sanding it or using a condition stone on the call and getting in the overall ceramic surface of the call.  you may never get the call back to were it should be overall... I've seen ceramic calls ruined with over sanding and stones getting into the layers of the ceramic ... how most of us are telling you how to condition the call is the right way if the surface hasn't already been damaged.