Text only | Text with Images

Turkey hunting forum for turkey hunting tips

Turkey Guns & Shooting => 10 Gauge Turkey Guns => Topic started by: puppy on March 23, 2015, 01:18:51 PM

Title: Fed HW #7 vs Nitro 4x5x7 Hevi
Post by: puppy on March 23, 2015, 01:18:51 PM
I normally use Nitro Mega Weight 4x5x6x7 averaging 280-290 in the 10" but haven't been able to get any this year and I am down to 2 shells so as a backup I got some Fed HW #7 and already had some Nitro 4x5x7 Hevi but had never shot them. Having never used either so I am not sure of density, knock down power etc and based on the following patterns (both are good), which is the best option. Attached pix but not sure if they will show as don't see them on preview, if they don't can someone tell me an easy way to post them.
1. Nitro 4x5x7 Hevi IC .690 55 degrees 309 in 10"
2. Fed HW #7 Hastings .690 55 degrees 244 in 10"
Title: Re: Fed HW #7 vs Nitro 4x5x7 Hevi
Post by: deadbuck on March 23, 2015, 01:36:47 PM
I envy your pattern, but not the pain you are receiving in recoil from the nitro load.
Title: Re: Fed HW #7 vs Nitro 4x5x7 Hevi
Post by: TRex18 on March 23, 2015, 01:58:20 PM
Nitro....WOW....
Title: Re: Fed HW #7 vs Nitro 4x5x7 Hevi
Post by: the Ward on March 23, 2015, 03:56:08 PM
I am jealous lol! That Nitro pattern is all business! That Fed 7 patterns' no slouch either, those are great numbers for that shell.         :OGturkeyhead:
Title: Re: Fed HW #7 vs Nitro 4x5x7 Hevi
Post by: taylorjones20 on March 23, 2015, 07:06:43 PM
Quote from: TRex18 on March 23, 2015, 01:58:20 PM
Nitro....WOW....

X2
Title: Re: Fed HW #7 vs Nitro 4x5x7 Hevi
Post by: puppy on March 24, 2015, 09:14:14 AM
deadbuck, you are correct on the recoil of the Nitro's but I guess I am a wus as I use a Lead Sled for most patterning ;D. I will shoot from hunting positions to ensure POI but other than that just so much easier to use the sled. Any opinions on the difference in density of shot material or just pick one and go start hunting?
Title: Re: Fed HW #7 vs Nitro 4x5x7 Hevi
Post by: TRex18 on March 25, 2015, 11:22:51 AM
I just picked up two boxes of the HW7s and gonna run them through my GT 695, NEF, hope I come out with the numbers your getting !
Title: Re: Fed HW #7 vs Nitro 4x5x7 Hevi
Post by: bowbird87 on March 26, 2015, 04:19:32 PM
Great patterns but that Nitro pattern awesome I'd be running them.
Title: Re: Fed HW #7 vs Nitro 4x5x7 Hevi
Post by: Gamblinman on March 27, 2015, 06:16:09 AM
I prefer the Federal Heavyweight #7 loads. I got tired of the pixie dust shot that Nitro loads have.

The Federal loads are ALL business.

Gman
Title: Re: Fed HW #7 vs Nitro 4x5x7 Hevi
Post by: Big perm2 on March 14, 2016, 10:02:30 PM
Ive been using nitros for about 10years or so I started out using hevi 4x5x7 the went to mega weight absolutely loved both of them, but like you said they don't make mega-weight anymore, I went back to the hevi shot. you will regret your your decision.. its about 10 of us guys around my little town who shoot them,none of us are displeased. I will tell you this we all shoot rhino choke tubes. we tried just about every choke made for 10ga. then we all ended up with rhinos .720, but that's just us. good luck God bless
Text only | Text with Images