Is there a recommendation from anyone for good place to get my m3020 dipped? I'd also like to have it drilled and tapped for a red dot. Is there a one stop shop or better to have different places do the different job?
Thanks!!
I have heard a lot of good about Tarjac and they are near me and have a good reputation locally as well. http://www.tarjac.com/
Might be easier and cheaper to trade guns.
Rob Roberts Custom Gun Works has done dip/cerakote/drill & tap on 2 shotguns for me. I was satisfied when i got them back and I've used them both for a couple of years now and remain satisfied.
In terms of TarJac, maybe its just me, but I do not want to have to completely disassemble my firearm before sending it in for the work. Sometimes removing things like sights can require special tools that not everyone has. I also want whoever does the work on my gun to re-assemble and test for function when the work is complete.
Quote from: ShortMagFan on June 02, 2020, 09:15:50 PM
Rob Roberts Custom Gun Works has done dip/cerakote/drill & tap on 2 shotguns for me. I was satisfied when i got them back and I've used them both for a couple of years now and remain satisfied.
In terms of TarJac, maybe its just me, but I do not want to have to completely disassemble my firearm before sending it in for the work. Sometimes removing things like sights can require special tools that not everyone has. I also want whoever does the work on my gun to re-assemble and test for function when the work is complete.
Unless they have changed something they will disable the gun for you for a fee. I can't comment on reassembly though. Just went and found it for you.
"Disassemble all firearms prior to shipping ** if they are not disassembled prior to shipping there is a $30-$90.00 Fee for disassembly**" Can be found on this page on their site. http://www.tarjac.com/services.html
send it to Carolina hydrographics best in the business
I don't know what camo you are wanting but I know he has the contract and does all
The small town hunting Retays also I contacted mossy oak directly and that's who they recommended above anyone to put their pattern on a gun he has an Instagram look him up you will not be disappointed
Thanks for the reply's and great information!
I have a benelli m2 at carolina hydrographics right now to be drilled and tapped for a sumtoy mount and dipped in mossy oak new bottomland camo. Tad has been communicating very well and I am excited to see the finished product.
Quote from: Brian Fahs on June 04, 2020, 04:09:04 PM
I have a benelli m2 at carolina hydrographics right now to be drilled and tapped for a sumtoy mount and dipped in mossy oak new bottomland camo. Tad has been communicating very well and I am excited to see the finished product.
you will not be disappointed Tad is awesome and his works speaks for itself he is just a good ol boy talked to him yesterday for about 30 mins on hog hunting
Tad is the man for sure found him 5 years ago and haven't used anyone else since..He's done a lot for me!!Also like it was already said he and mossy oak are tight
Sent from my iPhone using Tapatalk
Tad just finished mine. I had it done by a guy in north ms and it was terrible. Tad re did it. Looks great
(https://uploads.tapatalk-cdn.com/20200604/341d0a9b46e47d2435e21f01e50c083b.jpg)
Sent from my iPhone using Tapatalk
Ethridge Hydrographics does a killer job on the dip ,but I don't think they drill&tap. I too have an M3020 and used the Burris base #410333 as it was the lowest and looked the best to me. Good luck!
Quote from: BINK McCARTY on June 05, 2020, 12:06:45 AM
Ethridge Hydrographics does a killer job on the dip ,but I don't think they drill&tap. I too have an M3020 and used the Burris base #410333 as it was the lowest and looked the best to me. Good luck!
bink that looks great! Thanks for the info!!
Quote from: 5arraquiver on June 06, 2020, 10:36:31 PM
Quote from: BINK McCARTY on June 05, 2020, 12:06:45 AM
Ethridge Hydrographics does a killer job on the dip ,but I don't think they drill&tap. I too have an M3020 and used the Burris base #410333 as it was the lowest and looked the best to me. Good luck!
bink that looks great! Thanks for the info!!
No problem brother, you can find some of the work Ethridge does by going to their FB page. If I had a gun that was gonna get dipped it WOULD BE Ethridge. Every time I've sent them a message they've been very prompt in responding.
Mark's ceracoating and EC's hydrographics one stop shop for all your mentioned needs.
Quote from: wchadw on June 04, 2020, 07:55:31 PM
Tad just finished mine. I had it done by a guy in north ms and it was terrible. Tad re did it. Looks great
(https://uploads.tapatalk-cdn.com/20200604/341d0a9b46e47d2435e21f01e50c083b.jpg)
Sent from my iPhone using Tapatalk
That is bad .
I went with midnight bronze cerakote and new bottomland dip on the stock and forearm
That is bad ___ is what I tried to post
What did ya decide to do?
Bink
I am planning on semd ing my gun to ethridge. I have to save some funds first though ;)
Carolina graphic enterprises tapped dipped and cerakoted these for me.
Quote from: Brian Fahs on August 06, 2020, 06:33:07 PM
Carolina graphic enterprises tapped dipped and cerakoted these for me.
I was very happy with them for dip/cerakote . I got my drill and tap done by sumtoy. Both do good work
Sent from my iPhone using Tapatalk
Excellent info guys and those look great Brian!
Quote from: 5arraquiver on August 13, 2020, 10:18:59 PM
Excellent info guys and those look great Brian!
Thank you sir. I have a franchi affinity 3 there right now. I am very pleased with the work Tad did.
I just got my Stoeger m3020 back fro Tad at Carolina Graphic Enterprises. Had my gun drilled/tapped for my sumtoy mount and dipped. I am very pleased with how the gun turned out. The process was smooth and seamless. Tad is great to work with. Thanks to all my fellow turkey hunters for the help and advice.