OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

DIY gun painting pics

Started by aeasley10, February 02, 2020, 04:28:43 PM

Previous topic - Next topic

aeasley10

For those who have done this, what kind of results did you get (pics please)? 

-What type of paint (oil, latex, acrylic, duracoat)? 

-Did you clear coat?

-durability?


Sent from my iPhone using Tapatalk

Kygobblergetter





I believe there's a yt video from catman outdoors. Spray paint put on with a sponge and then clear coated. I've had no problems with durability so far


Sent from my iPhone using Tapatalk

SoDak_JD

I did my youth 20ga 870 with ShurShot stock last year.

I found this video really helpful.  Catman has been active on the board in the past.  He used the Rust-Oleum Camo paint.

https://youtu.be/VDUxdeLPWNE

See the pictures below for mine.  It's not nearly as good as his (got too much green and lost my pattern) but it'll work.  I clear coated with some flat Rust-Oleum as well.

SteelerFan

Very inexpensive (aka cheap!). Base of Krylon flat spray followed by natural sponge with 50 cent acrylic craft paint / assorted flat colors. No clear coat. No problem with wear (just add more paint if necessary - haven't had to).






FullChoke

I used water-based craft acrylic paint then oversprayed it with a Matte polyurethane. The overspray has lasted very well for about 5 years, but it now is showing a little bit of wear around those spots where I carry it. I will simply touch up these spots with matching acrylic and overspray it again.



Have fun.

FC


Outside of a dog, a book is a man's best friend. Inside of a dog, it's too dark to read.

aeasley10

Quote from: FullChoke on February 14, 2020, 10:30:09 AM
I used water-based craft acrylic paint then oversprayed it with a Matte polyurethane. The overspray has lasted very well for about 5 years, but it now is showing a little bit of wear around those spots where I carry it. I will simply touch up these spots with matching acrylic and overspray it again.



Have fun.

FC

Wow you better not lean or sit that thing down anywhere.  It's like a ghost!


Sent from my iPhone using Tapatalk

FullChoke

I'm waiting for one to try and roost on it.

Cheers  ;D

FC


Outside of a dog, a book is a man's best friend. Inside of a dog, it's too dark to read.

Brwndg

Rattle canned my 20 gauge Remington 11-87 Compact last year. 
Used Krylon Camo paints and some sponges.

After taping over the important parts, I sprayed the whole gun khaki.
Then used some sponges and went over gun with progressively darker colors trying to evenly apply colors.
Started with OD green, then brown, then black.  Used the black the least.
A few spots were too dark when I was done, so went back and hit up with the khaki again.

Finished it off with matte finish acrylic clear coat. 
Hunted about 30 days last season and finish is holding up great.


"If turkeys could smell, you'd never kill one" - Bud Trenis my turkey hunting mentor & dear friend

longislandloco

Quote from: SteelerFan on February 04, 2020, 06:22:25 PM
Very inexpensive (aka cheap!). Base of Krylon flat spray followed by natural sponge with 50 cent acrylic craft paint / assorted flat colors. No clear coat. No problem with wear (just add more paint if necessary - haven't had to).



Nice, like your technique!
"A man ought to have a good shotgun, needn't be an expensive shotgun, just a good shotgun".....Old Moe

Sir-diealot

Quote from: FullChoke on February 14, 2020, 10:30:09 AM
I used water-based craft acrylic paint then oversprayed it with a Matte polyurethane. The overspray has lasted very well for about 5 years, but it now is showing a little bit of wear around those spots where I carry it. I will simply touch up these spots with matching acrylic and overspray it again.



Have fun.

FC
Turned out very nice, even looks like it has texture.
Strength does not come from winning. Your struggles develop your strengths. When you go through hardships and decide not to surrender, that is strength. Arnold Schwarzenegger

John Koenig:
"It's better to live as your own man, than as a fool in someone else's dream."

aclawrence

Looks like it is covered in mold!  @Fullchoke


Sent from my iPhone using Tapatalk

huntineveryday

I have an 870 in need of a paint job. Looks like I need some paint and sponges.

What did you guys use to prep your guns for the paint?

Ranger

Full Choke: Your shotgun is the most realistic and effective camo job over ever seen. I re!ember before on another post you mentioning the reverse shading technique.... Can you please post some more pics of this gun and elaborate on how to do this?
"One can work for his gobbler by learning to communicate with him, or one can 'buy' his turkey with a decoy.  The choice is up to the 'hunter' " --William Yarbrough

Fdept56

Is there branches on that barrel?