OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

lid profile

Started by turkeyguy53, January 06, 2019, 12:28:20 AM

Previous topic - Next topic

turkeyguy53

Hi All ! I am rather new to this call making hobby and now have a router table in my small garage shop. Can anyone help me with the correct bit for making the proper profile on a lid? Does the bit have a name or some profile name that I can use to get on at Lowes or Home Depot?

Thanks for sharing with me and good hunting.

Peter

ol bob

The only way to get a bit for a router is to have it custom made which is very expensive, most starting out making boxes just sand the profile on with a belt sander.

doublespurs21

 I would say,, it will be a lot safer doing it by a sander,, routers  are good for biting your fingers and you need those,,,

Flydown Custom Calls

Peter,
Like the guys before me said... belt sander is the way to go. The router table is a great tool though for certain parts of the box call. I use my router table to route the grooves in the top of my lids for inlays. Just be careful with the router as it spins at high RPMs and can quickly take a finger off. Hope this helps.

Josh