OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Lasers for sighting 10s

Started by wrink, April 14, 2017, 08:41:31 AM

Previous topic - Next topic

wrink

Lasers for 10 Ga chambers can't be found--I've looked everywhere.  BUT if you can cut down a 10 Ga hull and slide a 12 gauge chamber laser into it--it works great!  I've used this for scopes, red dots and Williams fire sights on autos and single barrels 10s.  Use the laser first at 10 yds to get coarse alignment and then at 30 for fine tuning--you'll be fine at 40.  Just check your patterns and tweak if necessary with a very tight choke.  You will need a cloudy day or early morning but it's worth it.  Just like using a chamber laser on a rifle, saves  ammo and the shoulder!

the Ward

Great idea! I will give it a try when I get out to sight in. That's the bad thing about 10 gauges, there are no cheap target loads to shoot to get the sights close like you can with other gauges. And by the way..... :welcomeOG: