OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

10 Gauge Single Shot

Started by tha bugman, September 16, 2015, 01:58:38 PM

Previous topic - Next topic

tha bugman

Any suggestions on chokes and loads?  Also would it be possible to mount an adjustable sight (tru glo muzzleloader?) to the barrel?

deadbuck

What length barrel and is it fixed full choke or threaded?

tha bugman

24" barrel it is threaded for chokes

Mowoodsman

I use a Hastings ported .695 in my browning.  A lot of guys talk about Jeb's being real good but I haven't tried them yet. 
Lord, keep your arm around my shoulder and your hand over my mouth.

HoutzNWTF

I use an Indian Creek .690 in my single shot with Hevi-Shot Mag Blends and it does well. A Kicks Gobbling Thunder .690 with Federal Heavyweight 7s works well also. I am looking into putting an adjustable sight on mine as well... no dice yet.

deadbuck

Mine has a 32 inch tube and I run a sumtoy .685  . Puts 210+- in a 10 inch circle at 40 yards with the Fed Heavyweight 7's. This shell will crush a tom!

redmag

I had a 10 ga. NEF Pardner with a Kick's .690 choke and I shot Nitro Company's shells.  Honestly, I think it shot too tight but it was a bird slayer.  Unfortunately, I developed a flinch as the thing began to eat me up.  Sold it after about 5 yrs. of use.

nickp

I have an older Comp-N-Choke and it shoots the Fed 7's and mag blend very well.  I but that Sumtoy would be wicked good. 

tha bugman


Quote from: HoutzNWTF on September 17, 2015, 10:14:13 PM
I use an Indian Creek .690 in my single shot with Hevi-Shot Mag Blends and it does well. A Kicks Gobbling Thunder .690 with Federal Heavyweight 7s works well also. I am looking into putting an adjustable sight on mine as well... no dice yet.
. Let me know what you find out about the sights.  I am going to ask my gunsmith what he thinks this week.  That little brass bead may be hard to see on certain days.  If anything I may put a hiviz replacement bead


Sent from my iPhone using Tapatalk

HoutzNWTF

I still haven't gotten much of anything figured out yet. That Hi-viz replacement bead is a good idea that I am interested in.... if they make one the same size thread as the factory gold bead. From what I have read online, the thread of the bead is a very uncommon size and it may be neccesary to re-tap the hole. I have two of these single shot 10s so I will probably opt for a replacement fiber optic bead on one and put a red dot sight on the other. The guns are drilled and tapped and I bought the Weaver bases that fit the big barrels. Just need the sight