OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

Sight Mount for M1 Super90

Started by Cruiser, February 17, 2022, 04:24:35 PM

Previous topic - Next topic

Cruiser

I have acquired a Benelli M1 Super 90, Advantage Timber in 20 gauge and plan to put a Fastfire on it. Recommendations on a rib mount? Meadow Creek, Sumtoy, other? Thanks

SumToy

Tell us just how dead do you want them to be and we will see if we can get that for you.
Building American made products with American made CNC's and Steel.  Keep all the service Men and Women that gave a LIFE for our FREEDOM a live when you buy American.  God Bless the USA


Dylan730

I have the Aimtec saddle mount, works well just not with my Eotech 512. If you are interseted in it let me know. I would not drill and tap a M1 Super 90 the receiver is to thin.

Cruiser

Quote from: Dylan730 on February 22, 2022, 07:13:47 PM
I have the Aimtec saddle mount, works well just not with my Eotech 512. If you are interseted in it let me know. I would not drill and tap a M1 Super 90 the receiver is to thin.
Interesting comment; I wondered as it is a lightweight gun. But; (see above) Sumtoy recommended drill and tap? I am going to put a micrometer on it

Dylan730

If its one of the original stamped HK, do some internet searches, you will find a lot of information on it.

Cruiser

Quote from: Dylan730 on February 22, 2022, 07:26:19 PM
If its one of the original stamped HK, do some internet searches, you will find a lot of information on it.

Not H&K stamped; "Benelli U.S.A Corp-Accokeek, MD Made in Italy" . it is a 20 gauge. I have an H&K Montefeltro, 12 gauge.

ShortMagFan

Saw you pose the same question over on 24hcf. If Sumtoy says to D&T that's all I would need to hear. As I said in my response on 24hcf I've personally had 2 M2s D&T'd without issue. I'd be surprised if the M1 receiver was thinner than an M2

Don't overthink this.

Cruiser

Quote from: ShortMagFan on February 23, 2022, 08:32:53 AM
Saw you pose the same question over on 24hcf. If Sumtoy says to D&T that's all I would need to hear. As I said in my response on 24hcf I've personally had 2 M2s D&T'd without issue. I'd be surprised if the M1 receiver was thinner than an M2

Don't overthink this.
Agree

Greg Massey

Get you a speed bead mount ... they work just fine, cheaper and you don't have to send your gun off ...

madstrutter

Meadow Creek will put it out on the rib where it needs to be and makes the most sense.  The field of view you get with a rib mounted optic is amazing, and you can hit the controls on the red dot without moving.