OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

Meadow Creek Torque?

Started by Ridge Rooster, April 16, 2021, 09:33:19 PM

Previous topic - Next topic

Ridge Rooster

Mounted one today and 10 inch lbs seemed to work. Was worried if I went more it might strip. Held up to 6 rounds of 10GA so far. Anybody know what recommended torque is?

Ridge Rooster
Old School 11-87 + Nitros = Dead Ridge Roosters

bwhana

For a Burris FF, the recommended torque is 20-25 for the base to the receiver and 12 for the sight to the base.  I would assume that 12 would be applicable to the meadow creek as well, for all the screws.

Ridge Rooster

!0 inch lbs bends under rail plate. Noticed it today while hunting.

Ridge Rooster
Old School 11-87 + Nitros = Dead Ridge Roosters

Ridge Rooster

Talked to rep from Meadow Creek, he said 12 inch lbs. He said a bent bottom plate will not hurt a thing, didn't figure it would mount is holding up great.

Ridge Rooster
Old School 11-87 + Nitros = Dead Ridge Roosters

tonyzzzz

I got a little bend in mine to.  I have had no problem with it.  Very happy with the install and performance.  Was able to ta=g a nice bird on our opening day with that mount paired with a Holosun 507.

ShootingABN!

I just put mine together today with a AT3 ARO. Super excited about it.