OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Meadowcreek Mount Fit?

Started by tonyzzzz, March 31, 2021, 09:48:13 AM

Previous topic - Next topic

tonyzzzz

I picked up a meadow creek rib mount for my Benelli.  Checked the fit today and with the #5 shim which was the only one that went over the rib there was play right and left.  It wasn't a lot by still enough to give me concern?  Any users that can comment?

madstrutter

The spacers aren't meant to be tight on the rib due to rib tolerances. They are simply so that the mount isn't put on crooked. There will likely be .010-.015 play max in some guns, but some will be tight. Once it is clamped it won't move. The slot is not even needed once it's clamped, it could be a flat plate. It won't move.

I've even seen a 6mm rib which should use the #1 spacer have to use the #3 due to the cerakote. There's only about a .030" difference between #1 and #3.

tonyzzzz


howl

Sounds like a buncha mess. Bed that thing. Plastic steel and paste wax are cheap.

tonyzzzz

It locks done solid and I'm pretty confident it won't be a problem. The design is very good. Fit and finist to the sight is exact.   Rib mount is always going to be a compromise over a drilled and tapped receiver.  And I am not interested in tapping my Benelli.